HOME
Recent Custom Built Engines
ECi Fuel Injection System
New ECI Experimental Engine
America's Aircraft Engines
New RV6 QB
My First RV6A
Other RV Builder Links
Aviation Related Links
RV Aircraft Products
Avionics
Van's New Locking Gas Caps Installed

VAN'S AIR FORCE
WORLDWIDE WING
VIA DOUG REEVES
 

 

Silver Bullet Steering Linkage by
Full Throttle Concepts, Inc.

 I think this will provide protection against chafing from now on.

This is the Advanced  Flight Systems AF2500 engine monitor.

Very good prices on custom hose
with the new type fire sleeve.
Call Robert Williams.
918-835-3660 / 800-331-5946

The new ECI Titan Experimental Engine

.

Bob Snedaker at Fairing-Etc.  has taken over the RV Wheel Pant Brackets.
You can call Bob at 623-203-9795 to order.
          Fairings-Etc.
This is the empennage fairing that is made by Fairing-Etc.
This is a beautiful fairing and
really improves the looks of RVs.

  
Tailwind Airpark   This is a great place to live or visit . Click on the picture to go there. 

 
Kitlog is the best way I've found to
 log the  building of your project.

Attaway Air presents:

Richard Fowler owner of Americas Aircraft Engines explains the assembly and pertinent information of the 360 engine at Oshkosh 2002.

Richard has been interested in aviation since he was in grade school and earned his A & P mechanic rating in 1963. After being an A & P for a couple years he finished his pilot ratings and  now has over 10,000 hours flying singles and twins of all kinds.

Richard has been in business rebuilding aircraft engines for over thirty years now and has earned the respect of his peers and customers as well. In June 2003 ECI (Engine Components, Inc.) selected Richard's company, Americas Aircraft Engines, Inc. which is an FAA approved repair station, to assemble and sell the new ECI Titan 360 experimental kit engine. Richard and his employees are very proud of their work and there is no finer facility in the country with which to do business. 

Above is part of the great crew at Americas Aircraft Engines.

Ken and I started building this 360 engine at 8:30 in the morning and had it finished (except for the sump) by 5:00, and that's with all the measuring, weighing and matching completed.

Send mail to robbie@attawayair.com with questions or comments about this web site.
Last modified: March 04, 2008