|
|
|
HOME
![]() Very good prices on custom hose with the new type fire sleeve. Call Robert Williams. 918-835-3660 / 800-331-5946
![]()
Bob Snedaker at Fairing-Etc. has
taken over the RV Wheel Pant Brackets.You can call Bob at 623-203-9795 to order. Fairings-Etc. This is the empennage fairing that is made by Fairing-Etc. This is a beautiful fairing and really improves the looks of RVs.
|
Started 10-01-2000 Finished 02-27-2002 First Flight 3-4-2002 Click to See Equipment List And Pictures of my first RV6A
Equipment List for RV6A QB N675RE FIRST FLIGHT 3/4/2002 Engine & Prop
Avionics
Flight Instruments
Electrical
Lighting
Interior
Accessories
SOLD
I installed these louvers (4"x12" overall ) to help keep the temp well below the red line. All my engine gauges are set up in centigrade and the louvers decreased CHT by 25 degrees C with OAT at 44 degrees C. It was well worth the effort to install these louvers. They are manufactured by Don Ross 214-327-7312 http://www.dwrfab.net .
I made this panel from .090 material with .063 angle on top and bottom. This should make it more sturdy in high stress areas like the throttle quadrant.
Below is the final configuration of my panel.
Interior was done by DJ at www.cleavelandtool.com . I sent the leather to DJ and ask to get it back ASAP and received it back in 10 days. But now days that is impossible, you need to give her at least 2 to 3 months to fit you on her very demanding schedule. My interior turned out absolutely beautiful. I highly recommend DJ she and her crew do superb work.
Just doin.. some shop flying and checking out the seats.
This is the EXP Bus wired and working very nicely. Tie wraps were used to make a neat installation.
The next picture is the fuel system plumbed on the firewall.
Going to the paint shop.
Installing the wings and doing the final preparation for the first flight.
|
Send mail to robbie@attawayair.com
with
questions or comments about this web site.
|